Extreme Tools

41" Deluxe Portable Workstation Set

Item #:
EX-PWSRC4129TX
Rating:
80% of 100
Loading...
$2,229.00

Free ShippingTo the contiguous United States

Dimensions 41⅝" W x 24" D x 63½" H
Shipped Weight 610 lbs.
Warranty 5 Year Limited Warranty
Drawer Capacity 100 lbs / 200 lbs
Finish Textured Powder Coat
$2,229.00
$2,711.89

41" Deluxe Portable Workstation Set

Extreme Tools®, Inc. offers the very best in quality toolboxes at the most competitive prices. From their standard toolboxes to their top-of-the-line tool chests, all of their products are built to the extreme with quality and attention to detail. Not only do they offer better designs and more features, but they do so at less than half the price of other major competitors that sell the same size toolbox. The Extreme Tools® 41 Inch Deluxe Portable Workstation Set is a professional grade, high quality toolbox set featuring a drawer load rating of 100 lbs. (200lb. on top drawer), and locking handle drawer pulls. The Deluxe Portable Workstation Chest features a lockable lid with weather stripping, creating tight seal against dust & moisture at the shop or on the road, and features S.A.E. and Metric tool storage, power tool rack with built-in power strip, a pull-out side shelf as a convenient surface, and a lockable computer drawer. The bottom socket trays slide out to reveal additional storage.

***This toolbox is shown with tools to demonstrate where they are placed. Tools not included.

Your packaging may vary, and may include additional shipping materials.

Freight Inspection Instructions

 

Go to Inspection Center

1. SCHEDULE YOUR DELIVERY APPOINTMENT

Residential Addresses: All residential deliveries will require a delivery appointment.

Commercial Addresses: A delivery appointment is not required, but is highly recommended to ensure a proper inspection by responsible personnel.

*If you do not schedule a delivery appointment, your freight carrier will arrive without notice with your toolbox, and expect that you will be present for inspection.

This step is usually performed directly after your shipping notification is received.

2. PREPARE YOUR RECEIVING AREA

To make the inspection process go as smoothly as possible, please have the tools listed below available as soon as the carrier reaches the delivery point:

  • LARGE FLAT-HEAD SCREWDRIVER, PRY BAR or CLAW HAMMER
  • BOX CUTTER
  • WORK GLOVES
  • CAMERA or SMARTPHONE CAMERA
  • ASSISTANT (RECOMMENDED)
  • CELL PHONE**

Freight carrier drivers typically have 7 - 15 minutes to make a delivery; freight drivers are under no obligation to offer assistance.

3. INSPECT THE OUTER PACKAGING

Use your CAMERA to photograph any damage, and take notes. Examples of damage include, but are not limited to:

  • BOX CAVING IN, BENT TRIM
  • HOLES OR TEARS IN CARDBOARD
  • HOLES CREATED BY A FORKLIFT
  • ANY EXPOSED METAL
  • DAMAGE TO BASE
  • "NO-STACK" CONE ON CARDBOARD PACKAGING IS DESTROYED OR MISSING

In most cases, the outer packaging may display minor damage from general shipping conditions. Any marks or damage on the packaging you see, no matter how trivial, is enough to warrant a complete inspection of your tool box.

If you see any damage at this point,

STOP

NOTE THE DAMAGE ON THE BILL OF LADING and CONTINUE YOUR INSPECTION

***If possible, write on the bill of lading yourself. If the driver insists on being the one to write on the bill of lading, initial their notes showing that you agree with them.  If you do not agree with the driver's notes, DO NOT sign the bill of lading.***

4. REMOVE STRAPS AND ACCESSORY

Cut the straps with the BOX CUTTER; Avoid cutting the straps that enclose the accessory carton

Have an ASSISTANT or use a forklift help you lift the hutch or accessory off the crate, then carefully place it aside

5. UNFASTEN / REMOVE CRATE

TV-5611TC, TV-5610CH, select Extreme, and sheathed crates: The crate can be simply lifted off the box.

Wearing your WORK GLOVES, start with the top panel of the crate

Bend the metal tabs upward in the direction of the slot, straighten the tabs with PLYERS if needed

Remove the top portion of the crate

6. REMOVE PACKAGING

Continue bending the metal tabs, and remove each panel in sequence until the inner packaging is exposed

Lift the cardboard box off, and remove remaining inner packaging and plastic liner

Preserve all packaging and set aside

If you see any damage at this point,

STOP

NOTE THE DAMAGE ON THE BILL OF LADING and CONTINUE YOUR INSPECTION

7. INSPECT TOOLBOX

Inspect your toolbox on each side thoroughly for any dents or scratches

Inspect the powder coat and frame to detect scratches or dents that are less visible

Take clear photos and notes of all damage

8. INSPECT ACCESSORIES

This step may be skipped if your shipment includes only one piece. After the roller cabinet has been found to be in perfect condition per the inspection, you must also inspect the accessories before you sign.

Cut any straps, remove, and set aside packaging.

Inspect, note and photograph any damage 

If you see any damage at this point,

STOP

CALL US IMMEDIATELY AT: 888.289.1952

DO NOT SIGN FOR THE DELIVERY 

UNTIL WE WALK YOU THROUGH HOW TO REFUSE THE DAMAGED ITEM(S)*

*this is necessary for your protection in the event of freight damage
9. SIGN FOR YOUR SHIPMENT*

You may sign the bill of lading once the shipment you are accepting has been inspected and declared to be in perfect condition by your own best judgement.

When you sign the bill of lading, you are signing an agreement with the freight company that states that you or an authorized representative has thoroughly inspected the shipment.

Once signed, you agree that you have received the shipment without damage. This agreement also waives any rights to file a freight claim.


*If you have refused the delivery due to damage,
YOU MUST call StrictlyToolBoxes.com immediately at 888.289.1952

Extreme Limited Warranty (5 years)

The limited warranty on all EX Standard Series, PWS Series, RX Series and TX Series storage tool chest (chest, cabinet, side cabinet or workbench) are warranted to be free from defects in materials and workmanship for a period of five (5) years from the date of original purchase and a Limited Lifetime Warranty on our EX Professional Series.

Note: the TX Series Road Box has a limited warranty for 1 year from the date of original purchase.

If this product is defective, please call Extreme Tools® at 630-369-9303. Please tell us the model number, serial number, the date of purchase, and what the problem is. If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store, distributor, or to us unless we send you written instructions for return. In the event it becomes necessary for your product to be returned, we will notify you how to proceed with a return goods number (RGA). A copy of your original purchase receipt must accompany the return. A copy of the receipt must be mailed along with the warranty card filled out correctly and returned to Extreme Tools® within 30 days. Extreme Tools® obligation to repair or replace defective parts in accordance with the terms set forth herein shall be the buyer's sole and exclusive remedy. Extreme Tools® shall not be liable for any damage for loss of the product or consequential damages of any kind. The company neither assumes nor authorizes any other person to assume for it, any other liabilities beyond the conditions set forth in this warranty, in connection with the product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Extreme Tools® shall not be liable for, nor shall this warranty include or apply to any loss of damage caused by or resulting from the following: (1) Use of the product in a manner other than as specified in this product manual; use of the product beyond its rated capacity or specifications; (2) Modification, alteration or repair not performed by Extreme Tools® or its authorized subcontractors or third parties approved by Extreme Tools® ; (3) Floods, fires, earthquakes, tornado, vandalism or other acts of nature, including windstorms, lightning and hail damage or any other insurable loss under standard fire and extended coverage plans; (4) Abuse, misuse, negligence, improper or inadequate maintenance, tampering, or accident; chemicals that can damage powder coat finish or causing rust; (5) Accessories, alterations, attachments or other devices not furnished by the company or (6) Failure of buyer to follow operating procedures or the instructions of the company, or to provide a suitable operating environment. All customers receiving shipments of our products are responsible to inspect shipments before accepting; Extreme Tools® will not be responsible after shipment of product is accepted if product is damaged or has missing parts.

Warning

  • Do not open more than one drawer at a time.
  • Keep children away.
  • Lock drawers before moving.
  • Apply brakes on casters when not moving unit.
  • Do not step in or on drawer.

Tools and materials shown on this website are not included

Extreme Tools®, Inc.

Extreme Tools®, Inc. is located in Naperville, IL and was founded by their president Larry Grela in 1999. The business began with a single tool route and quickly grew into 12 mobile tool trucks and a stocking warehouse.

In 2004 Extreme Tools®, Inc. changed direction when it became a tool box manufacturer that designed and engineered a professional line of tool boxes. To help the company expand further Ronald Sidler joined Extreme Tools®, Inc. as a business partner.

Since Extreme Tools®, Inc. became a manufacturer of tool boxes, their goal has constantly been to design and build high quality tool boxes for the industrial, automotive, and retail markets at a much lower price than their competitors.

With more than 30 years of working experience and knowledge in the automotive industry, Extreme Tools®, Inc. has a proven background to be an innovator and leader in the professional tool storage market. Their toolboxes are made with the highest quality material available, and have more features included in their base price than their competitors.

Extreme Tools®, Inc. offers such a great product value that the company was featured on the front cover of the Professional Distributor Magazine in 2004.

How long can I expect this item to deliver?

  • Most orders will leave the warehouse in 1 – 3 business days. This item will deliver by freight truck and the average transit times vary by location from 2 – 6 business days.
  • Please note that all residential deliveries will require a delivery appointment.
  • For standard delivery times in your local area, please contact Strictly Tool Boxes at 888.289.1952.

How can my order be eligible for Free Freight?

  • Free shipping applies only to our standard shipping services. Standard shipping does not include lift gate fees that can be associated with shipping larger items by freight truck.
  • Free freight promotions apply to the 48 mainland US states only.

Do I need Lift Gate Delivery?

  • Lift Gate delivery is required to remove your shipment from the back of the freight truck, directly to the ground.
  • Delivery locations with an elevated shipping/receiving dock, forklift, or specialized equipment may not require lift gate.

Specifications

Product Overview

Manufacturer Extreme Tools
SKU EX-PWSRC4129TX
Dimensions 41⅝" W x 24" D x 63½" H
Net Weight 460 lbs.
Shipped Weight 610 lbs.
Warranty 5 Year Limited Warranty

Toolbox Construction

Shell Gauge 20
Drawer Gauge 20
Caster Channel Gauge 14
Color Black, Red
Finish Textured Powder Coat
Lock Style Tubular Coded
Qty Side Handles 3
Work Surface N/A
Corner Trim None
Lid Holding Device Hydraulic Strut

Drawer Information

# of Drawers 13
Sets of Drawer Slides 16
Drawer Liner Type High Density Foam
Drawer Latch Type Locking Handle

Storage Capacity

Drawer Slide Type Roller Bearing
Drawer Capacity 100 lbs / 200 lbs
Total Square Inches 4,467
Total Cubic Inches 19,068

Caster Information

# of Casters 4
Caster Capacity 600 lbs per caster
Caster Type 2 Rigid / 2 Swivel
Caster Upgrade N/A

Product Overview

Manufacturer Extreme Tools
SKU EX-PWSRC4129TX
Dimensions 41⅝" W x 24" D x 63½" H
Net Weight 460 lbs.
Shipped Weight 610 lbs.
Warranty 5 Year Limited Warranty
Product Overview

Toolbox Construction

Shell Gauge 20
Drawer Gauge 20
Caster Channel Gauge 14
Color Black, Red
Finish Textured Powder Coat
Lock Style Tubular Coded
Qty Side Handles 3
Work Surface N/A
Corner Trim None
Lid Holding Device Hydraulic Strut
Toolbox Construction

Drawer Information

# of Drawers 13
Sets of Drawer Slides 16
Drawer Liner Type High Density Foam
Drawer Latch Type Locking Handle
Drawer Information

Storage Capacity

Drawer Slide Type Roller Bearing
Drawer Capacity 100 lbs / 200 lbs
Total Square Inches 4,467
Total Cubic Inches 19,068
Storage Capacity

Caster Information

# of Casters 4
Caster Capacity 600 lbs per caster
Caster Type 2 Rigid / 2 Swivel
Caster Upgrade N/A
Caster Information

Layout

Drawer Chart
Drawer #
Drawer DimensionsW" x D" x H"
Drawer Capacity
Sets of Drawer Slides
Cubic In
SQ In
TotalN/AN/A1419,0684,467
137.5215.25200 lbs.24,134787
223.38212.25100 lbs.11,104490
311.75212.25100 lbs.1555246
423.38212.25100 lbs.11,104490
511.75212.25100 lbs.1555246
623.38212.25100 lbs.11,104490
711.75212.25100 lbs.1555246
823.38215.25100 lbs.12,577490
911.75215.25100 lbs.11,295246
1023.38218.25200 lbs.24,050490
1111.75218.25200 lbs.22,035246

Customer Reviews

Customer Reviews
Most Helpful Customer Reviews
  1. Reviewed by

    on

    80%
    41" xtreme combo
    Very nice boxes tons of storage and origination is king (Posted on 4/28/2015)

    Describe Yourself:
    Professional
    Comment Was this review helpful to you? Thank you for your feedback! You already voted Sorry, we failed to record your vote. Please try again
Post a comment
as
Cancel
You're reviewing: Extreme 41" Deluxe Portable Workstation Set as
Your Rating

Freight Inspection

In order to ensure a positive customer experience, properly inspecting your new toolbox becomes the most important part of your purchase. When you sign the bill of lading, you are signing an agreement with the freight company that states that you or an authorized representative has thoroughly inspected the shipment. This agreement certifies that you have received it without damage and are waiving any rights to file a freight claim.

Go to Inspection Center

© 2018 Strictly E-Commerce, Inc. All rights reserved.